Search

DJI- April Firmware Updates

DJI- April Firmware Updates: Inspire 1 Series, Phantom Series, Matrice 100, & Lightbridge

Inspire 1 Series:

New firmware updates are available for DJI Inspire 1 series, please visit respective product pages to download and update your firmware.

Inspire 1 and Inspire 1 Pro

1.Firmware upgraded to v1.8.1.00
2.DJI GO Android upgraded to v2.7.2

Major Updates
1.Improved encryption to enhance security during transmission. Both the aircraft and the remote controller must be upgraded or else they will not link.
2.Fixed the issue of batteries over-discharging when stored for extended periods of time (over 90 days).
3.Fixed the issue of landing gears lowering in midair on rare occasions.
4.Improved stability for camera.
5.Optimized gimbal parameters.

Notes
Be sure to upgrade the aircraft before upgrading the remote controller, otherwise the aircraft may not able to exit Transport mode properly.
Battery firmware is included in this All-in-One firmware update. Update all Intelligent Flight Batteries by using this firmware.
Camera version v1.8.1.00 and aircraft version v1.8.1.00 should be displayed on DJI GO as this update is only for the gimbal and camera system. The version will only display correctly in DJI GO after connecting to the Internet when upgrade is complete.

Inspire 1 RAW

1.Firmware upgraded to v01.08.00.90
2.DJI GO Android upgraded to v2.7.2
3.DJI CineLight upgraded to v0.9.9
4.DJI Camera Exporter upgraded to v1.0

Major Updates
1.Improved encryption to enhance security during transmission. Both the aircraft and the remote controller must be upgraded or else they will not link.
2.Improved stability for camera.
3.Optimized gimbal parameters.

Notes
Be sure to upgrade the aircraft before upgrading the remote controller, otherwise the aircraft may not able to exit Transport mode properly.
Camera version v01.08.00.90 and aircraft version v01.08.00.90 should be displayed on DJI GO as this update is only for the gimbal and camera system. The version will only display correctly in DJI GO after connecting to the Internet when upgrade is complete.

Phantom Series:

New firmware updates are available for DJI Phantom series, please visit respective product pages to download and update your firmware. You can update the Phantom 4, Phantom 3 4K and Phantom 3 Standard firmware via DJI GO app.

The Phantom 4 firmware version is updated to v1.1.301, Phantom 3 Professional and Phantom 3 Advanced firmware version is updated to v1.8.80, Phantom 3 4K firmware version is updated to v1.4.30, Phantom 3 Standard firmware version is updated to V1.5.70. The DJI GO app Android version is updated to v2.7.2.

Phantom 4:
What’s New:
1.Improved encryption to enhance security during transmission.
2.Optimized take-off logic for the aircraft when the compass experiences interference.
3.Corrected system status information for some batteries.
4.Increased downloading speed for photos and videos.

Note:
Firmware updates for both the aircraft and remote controller is required.
If you intend to upgrade the firmware through the DJI GO app, be sure to first update the Android version of DJI GO to v 2.7.2 before upgrading the firmware for the aircraft and the remote controller.

Phantom 3 Professional and Phantom 3 Advanced 

What’s New:
1. Improved aircraft stability through optimized flight controller logic.
2. Optimized gimbal parameters.
3. Fixed clip preview error in 2.7K resolution mode.
4. Improved encryption to enhance security during transmission.

Notes:
1. Firmware upgrade for both the aircraft and remote controller is required.

Phantom 3 4K and Phantom 3 Standard

What’s New:
1. Improved aircraft stability through optimized flight controller logic.
2. Optimized gimbal parameters.

Notes:
DO NOT turn off the remote controller or exit DJI GO app during the update process.

Matrice 100:

New firmwares are available for Matrice 100, please go to http://www.dji.com/product/matrice100/info#downloads to download DJI Assistant and update your firmware.

DJI Assistant is updated to v1.0.3, Firmware Update Package (Zenmuse X3) is updated to v1.2.0.90
Firmware Update Package (Zenmuse X5) is updated to v1.2.0.90, and DJI GO app Android version is upgraded to v2.7.2.

What’s New

Assistant Software: Revised upgrade methodology for DJI Assistant 2.

Firmware: Improved encryption to enhance transmission security.

Notes:

1. The latest version of DJI Assistant 2 must be used to upgrade the firmware to v1.2.0.90.
2. Both the aircraft and the remote controller must be upgraded or else they will not link.
3. This firmware update package does not cover Intelligent Flight Batteries.
4. This firmware can be downgraded to v1.2.0.80 only.

Lightbridge 2:

Lightbridge 2 New Firmware updates now are available, please visit http://www.dji.com/product/lightbridge-2/info#downloads<a  href=”http://www.dji.com/product/lightbridge-2/info#downloads”> to download DJI Assistant 2 v1.03 to upgrade your firmware.

Air System Version is upgraded to v. 1.1.10, Ground System Version is upgraded to v.1.1.0, DJI Lightbridge 2 Assistant Version is upgraded to v.1.0.3, and DJI GO app Android version is upgraded to v2.7.2.

What’s New:
Improved encryption to enhance transmission security for firmware.

Notes:
Both the Air System and the Ground System must be upgraded or else they will not link.

Written by 

UAV Expert News press, curated UAV content from around the world to spread the good word about drones and UAV technology. Each article we curate is linked back to the original source and full credit is given to the author.

Related posts

2 thoughts on “DJI- April Firmware Updates

  1. Paul Kwon

    Hello, sir.

    I am setting lightbridge2 with A2, S1000+, and Z15-5D3. And I got upgraded both Airsystem(v1.1.10) and Ground Unit(v.1.1.0).

    But only “No signal” is confirmed. And I never map another channels except A,E,T,R,Gear,GoHome.

    What can I do?

  2. Gene

    I can not get my LB2 ground unit to update to 1.1.0…. It tells me it’s updated successfully but when I reboot the ground unit, it STILL says 1.0.4+

    Any suggestions? Will keep trying but unit will go back to DJI next week for updating.

    NEED HELP..

Comments are closed.

Show Buttons
Hide Buttons